Need Product or Technical Support?

Vist our support area

TC7000 Charging The Battery

Home Technical Q&A TC7000 TC7000 Charging The Battery


                                                                     CHARGING THE BATTERY

  1. Plug the charger into a wall socket/outlet. The Green LED will illuminate showing mains power is connected and that the charger is ready.
  2. Insert TC7000/7150 battery pack into the charging station. Care must be taken to ensure that the battery is inserted in the correct orientation, otherwise battery and/ or charger damage may occur. If the battery is properly located in the charging station, the Yellow LED on the charger will illuminate to indicate charging. Once the charge cycle is complete, the Yellow LED will extinguish.
  3. If the Yellow LED flashes, this indicates a deep-discharge or short circuit state. The battery should be removed from the charging station immediately and the troubleshooting guide referred to.


Download Your Reporting Software?

Please complete the form below and we will email you a download link.