You need troubleshooting tools that are rugged, reliable, efficient and accurate. Tools that can help you detect problems fast and communicate them easily to your team. That’s what the CorDEX TCSERIES Intrinsically safe cameras do. They give you the ability to see heat and detect problems before they happen. All from a tool that is virtually indestructible in everyday use.
With its Intrinsically Safe certification when it comes to Rugged, TC-Series sets the bar. IP54 Ingress Protection rated, you can be sure these cameras will continue to operate in any weather, day or night. Concerned about your valuable tool being dropped and damaged? Don’t be, TC-Series has been tested and certified as having passed a 3’/1m drop onto concrete at a temperature of -20C. Three times!
- Intrinsically safe certified. Safe, Reliable and above all, Rugged
- ATEX/IECEx certified
- High speed, articulating lens. Shoot high quality images over, under and around obstacles
- Onboard RFID tag reader. Assign images to RFID tags and automatically create reports, manage data and create trends
- CorDEX CONNECT™ enabled
Why choose our intrinsically safe thermal imaging camera?
• Ex ib IIIC T200°C Db Tamb -10°C to +40°C (Dust)
• Ex ib I Mb (Mining)
• Detection range up to 5cm (1.9in)
Brochure and Product DataTC7000 Brochure1.35 MB
ReviewsThere are no current reviews for this product.
Submit a Review
Select your rating:
Can we replace the battery in the hazardous area?
The ultra longlife lithium battery pack used in the TC Series infrared cameras is capable of powering the camera continuously for upto 8 hours, should a battery change be required then this must be performed in a non-hazardous location.
Will the TC7000 work only with your SMART IR Windows?
Both the TC7150 and TC7000 will “see” through any IR Window compatible with Longwave infrared imagers. The additional features associated with CorDEX CONNECT and CorDEX SMART IR Windows are an added benefit of using instruments designed as a complimenting system.
You say that TC7150 is compatible with the IW Series SMART IR Windows, what does this mean?
Both TC7000 and TC7150 have onboard 13.5Mhz RFID scanners which means that they can communicate directly with the IW Series SMART IR Windows. The SMART IR Window wirelessly responds with a unique ID code embedded in a chip within the IR Window which enables the camera to download transmission specific data for that IR Window type from the CorDEX Servers.
Once the camera has this data, it automatically tags images taken via the IR Window for later seamless correlation via CorDEX CONNECT database software. The camera also automatically enables complex on-board correction algorithms to remove the error caused by the IR Window itself.
The result, accurate measurements with no more pen and paper attempts at correlating hundreds of IR Window images with the correct location. The combination of TC7000, IW Series SMART IR Windows and CorDEX CONNECT database package takes the load and provides accurate results, every time.
What is the range of the RFID Scanner on the TC7000 and TC7150?
The range of the RFID scanner on TC7000 and TC7150 is limited to approximately 50mm (2”) although this does also depend somewhat on the tag.